Updated April 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
If you are reading this article, you must have encountered error 0x00000109 (blue screen) when a critical structure has been damaged. There are many reasons for this error, such as installing a new program. Don’t worry, as all the sequences related to blue screen error code 0x00000109 are listed here. This will allow you to identify all the common causes and triggers of this error and follow the appropriate instructions and tips to get your system back up and running.
Blue screen error 0x00000109, also known as Critical Structure Damage, is a p.c. system error that causes the computer to shut down completely. When this happens, it means that the system kernel has detected data corruption or critical kernel code. The kernel is an important part of the operating system (OS). The main role of the kernel is to manage the hardware, especially the processor and RAM. The kernel is divided into two components: the monolithic kernel and the micro-kernel. The latter is responsible for regulating the main tasks of the system, while the monolithic kernel focuses on the various drivers. When a component is corrupted, it affects other components such as hardware, processor, RAM, and even drivers.
What causes blue screen error 0x00000109?
Since there are several factors that can cause this error, you need to find the specific cause and fix it. These include the following:
Faulty system memory: a blue screen error can occur when the RAM module is not working properly. This causes the system to shut down all important RAM-related tasks. The module may become faulty over time or in case of a power failure. You should check the system memory and make sure that it is still working properly.
Damage to system files: a sudden power outage and incorrect shutdown or startup, hard disk read/write errors, and virus attacks can corrupt system files. This is one of the most common causes of discussion errors. There are built-in utilities such as SFC and DISM that you can run to solve this problem. Another option is to perform a clean installation to reset all operating system components.
Virus infection: One of the most common causes of this error is when a virus tries to change the system kernel data. In this case, you need to reboot the system and then check it for viruses.
Driver problems: You may have recently installed a driver that has affected your PC’s boot configuration data. It also happens that the system drivers are not correctly installed after a Windows update. In this case, you need to boot into safe mode and use the “System Restore” utility to return your computer to a previous state when the problem did not exist.
Now that we’ve covered the various causes, it’s time to talk about how you can remove 0x00000109 BSOD. So, please read on.
How to Solve the 0x00000109 bluescreen error
You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally it is a great way to optimize your computer for maximum performance.
The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:
April 2024 Update:
Check for Windows updates
- Click on Start and select Settings.
- Go to Update and Security.
- Click on Windows Updates.
- Check for pending updates. Click Download to install the updates.
- After installing the updates, restart your system and check for improvements.
Lack of updates often leads to “blue screen of death” errors. So never forget to download the latest fixes for your device.
Remove devices
- If a BSOD error occurs after installing a new USB device, try uninstalling the devices.
- If you have not installed any new devices, disconnect all devices and restart the computer.
- If the BSoD error does not occur, try connecting all devices one by one to see if a particular device is causing the error.
- If one is found, open the Device Manager and try updating the device driver.
If you get the “Unknown Disk: 0x00000109” error, the first thing to do is to check your hardware settings, disconnect the devices first, and then follow the steps above.
Use a system restore point
- Press the Windows key and type system restore.
- Click the Create restore point option.
- Click the System Restore button.
- Select the Show all restore points option, if applicable.
- Select the last restore point and click Next.
- Make sure that you have read the description and click Finish.
- The recovery process may take several minutes.
- Windows restarts and displays a message stating that the process was completed successfully.
During this process, the restore point will not delete any personal files. However, it may remove updates or applications that were installed after the restore point was created.
Restart your computer in safe boot mode
- Press the Windows +R key to open Run.
- Type MSConfig and click OK.
- In the System Configuration window, open the Boot tab.
- Under Boot Options, select Secure Boot and click Apply and OK.
- System Configuration will prompt you to restart your computer.
- Click Restart.
In Safe Boot mode, Windows boots your computer with a minimum of drivers and features. This will allow you to analyze whether the error is caused by third-party software or hardware.
If the BSOD 0x00000109 error does not occur in Safe Boot Mode, a third-party application may be causing a conflict with the system.
Uninstall third-party applications
- If the BSoD error occurs after installing a new application, try uninstalling it.
- Press the Windows + R key.
- Type Control and press the OK button.
- Go to Programs -> Programs and Features.
- Select a recently installed application and check it for enhancements.
It is possible that some applications installed on your computer are interfering with the optimal functioning of your device. Therefore, you should uninstall the problematic software.
Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here
Frequently Asked Questions
How can I fix 0x00000109?
- Open Windows Updates by entering an update in the search box.
- Click the "Update and Restore" button.
- Click the "Choose how to install updates" button.
- Click on "Install updates automatically" under "Important updates".
What is a blue screen error and how do I fix it?
A blue screen error (also known as a shutdown error) can occur when a problem causes your device to shut down or restart unexpectedly. A blue screen may appear, telling you that your device has encountered a problem and needs to be restarted.
How do I fix the blue screen error?
- Reboot or shut down the computer.
- Scan your computer for malware and viruses.
- Run Microsoft Fix IT.
- Make sure the RAM is properly connected to the motherboard.
- Defective hard drive.
What is the most common cause of blue screen errors?
Blue screens are usually caused by computer hardware problems or hardware driver software problems. Sometimes they can also be caused by problems with low-level software running in the Windows kernel. Normal applications usually cannot cause the blue screen.
