Fix System Error 2146697208 Error Processing Resource

Updated April 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link

1. Download and install the repair tool here.
2. Let it scan your computer.
3. The tool will then repair your computer.

System error 2146697208, Error processing resource errors and other critical errors can occur if your Windows operating system is corrupted. Program opening becomes slower and response times are delayed. If multiple applications are running, crashes and freezes may occur. There may be many reasons for this error, including excessive boot entries, registry errors, hardware/ RAM memory losses, fragmented files, unnecessary or redundant program installations, etc.

Here are some proven patches to help you correct system error 2146697208.

Run a sfc scan of your PC.

For advanced users, the following steps are used to troubleshoot system errors – 2146697208 Error Processing Resource Problem Manually.

• SFC is absolutely the most useful way to repair corrupted Windows files. The whole process is very simple.

Start Windows in Safe Mode or Safe Mode with Network.

Safe mode is a troubleshooting option that limits Windows to basic functions. Safe mode starts Windows only with the most important drivers and services. Safe mode with networking starts windows with basic drivers and network support only. To boot your computer into Safe Mode or Safe Mode with the network, follow the instructions below:

1. Immediately after turning on or restarting the computer (usually after the computer beep), press the F8 key at one-second intervals.
2. After your computer displays hardware information and performs a memory test, the Advanced Boot Options menu appears.
3. Use the arrow keys to select Safe Mode or Safe Mode with Network and press ENTER.
4. When you have finished troubleshooting, repeat steps 1 to 3 and select Start Windows normally to return to normal Windows setup.

Clean boot remedy

For a trouble-free Safe Mode boot under Windows 8 or Windows 10, follow these steps:

1. Press the “Windows + R” button to open a run-box.
2. Enter msconfig and click OK.
3. On the General tab, click Selective Start.
4. Uncheck the Load start objects box.
5. Click the Services tab.
6. Select the Hide all Microsoft services check box (below).
7. Click Disable All.
8. Click the Start tab.
9. Click Open Task Manager.
10. In the Start tab, right-click each enabled initial object and choose Disable.
11. Click OK.
12. Click Restart.

After troubleshooting is complete, restore your system as follows:

1. Press the “Windows + R” button to open a run-box.
2. Enter msconfig and click OK.
3. On the General tab, select Normal Start.
4. Click the Services tab.
5. Clear the Hide all Microsoft services check box.
6. Click Enable All.
7. Click the Start tab.
8. Click Open Task Manager and activate all your starters.
9. Click OK.
10. Click Restart.

To configure Windows to use the normal boot state, simply cancel the changes.


Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here