Fixing BSOD 0x00000014 Stop Error

Updated April 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link

1. Download and install the repair tool here.
2. Let it scan your computer.
3. The tool will then repair your computer.

The STOP error 0x00000014 always appears on a STOP message, commonly known as the Blue Screen of Death (BSOD). One or a combination of the following errors can be displayed in the STOP message:

  “STOP: 0x00000014”
“CREATE_DELETE_LOCK_NOT_LOCKED”

As for the causes of the STOP 0x00000014 error, this error usually occurs when a device or hardware driver problem occurs. This error can also occur when users attempt to run a particular application or update or modify an existing application. If the error 0x00000014 occurs, the operating system will restart to prevent the PC from running later.

Regardless of the cause of the event, it is important to ensure that the 0x00000014 stop error is corrected as quickly as possible to avoid any undesirable inconvenience in the future.

0x00000014 Error messages often appear as a result of an overload of the Windows registry or incorrect entries from non-existent programs, usually due to improper uninstallation of the software. Other common causes include incorrect user entries, missing files that have been accidentally deleted from the registry, and system failures. It is important to know when and where the error occurred to troubleshoot the problem.

How to repair the blue screen STOP 0x00000014 Error

The STOP 0x00000014 troubleshooting is a challenge because it is a rare error. Programmers have said that STOP 0x00000014 is exceptionally rare, even for BSOD controls. Nevertheless, it is possible to correct the error, as it will most likely have the same causes as the other BSOD errors. Once you have identified the cause of STOP 0x00000014, you can find a solution. Fortunately, there are several solutions to correct the BSOD error.

Re-inspection of hardware

BSOD errors occur when the equipment is not properly connected. Therefore, if you receive the BSOD error, it is worth checking all cables to determine if the equipment is properly connected. The process takes a few minutes and you can solve the problem.

RAM – Test with Memtest86+

How to test and diagnose RAM problems with Memtest86+:

Preparation of the media with a USB key

1. Download the latest version of “Auto-Installer for USB-Stick (Win 9x/2k/xp/7)” from this link: Memtest86+ – Extended memory diagnostic tool for memory diagnosis

2. connect an empty USB key. Size doesn’t matter, because the real files take up 180 KB of space.

3. go to the downloaded.zip folder and double-click on the.exe file it contains.

4. follow the instructions in the setup program. To reduce the risk of problems, it is recommended to format the drive.

Testing

Once the CD is in the drive or USB stick, restart your computer. If Memtest does not start automatically, go to the BIOS and change the CD drive or USB drive to start it first.

Memtest starts the test as soon as it starts. No attendance is required.

Run it until at least 8 executions are completed or there are errors (whichever comes first). The longer you make it last, the better.

https://www.youtube.com/watch?v=O1hb_fBy9y4


Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here