How To Fix: BSOD Stop Error 0x0000001e



RECOMMENDED: Click here to fix Windows errors and optimize system performance

Bluescreen 0x0000001e is a hexadecimal error format that Windows and other software vendors use to identify the error. The error 0x0000001e occurs when the system could not retrieve the exception in kernel mode. BSOD 0x0000001e is a critical error from which the system could not recover and displays the stop message or blue death screen. The error may contain additional parameters depending on the system configuration. These additional parameters describe where the instructions were loaded when the error occurred.

Blue Screen of Death Error 0x0000001e can occur under any version of Windows. There is no Windows version free of BSOD messages, others like bluescreen bccode 9f, 0x0000007b error and 0x000000d1 error etc. When the system encounters the blue screen 0x0000001e, it displays the messages and stops abruptly. If this error occurs, no warning message is displayed on the screen. These errors are a nightmare for any user because they are the main cause of data loss.

These people will surely understand that the reason for this error, which had to be rewritten because of the error on the blue screen 0x0000001e, must be found. Knowing the reasons for the error will help you take preventive measures to prevent it from happening again.

The error can be caused by one of the following situations:

  • Hardware problems
  • Incompatibility with device drivers
  • Corrupted system services
  • Newly installed software that may not be compatible with your Windows versions.

Disabling the antivirus program

It is possible that the antivirus program will cause the error 0x0000001E. To confirm this, you can try to disable the antivirus program. Antivirus should not be the problem if it has been updated with the latest version. So if it turns out that disabling the antivirus program stops the errors. Then update the antivirus protection and try again. If nothing works, uninstall the software and inform the software vendor.

Check your RAM

The reason for this blue screen error 0x0000001e is mainly due to a bad contact, a defective or erroneous RAM (Random Access Memory).
You can check your RAM physically or with the Windows memory diagnostic tool.

Windows Memory Diagnostics

1) Connect and disconnect your RAM to ensure that it is installed correctly and stable.
Clean your RAM if it is dusty. And don’t forget the RAM slot.



September 2020 Update:

We now recommend using this tool for your error. Additionally, this tool fixes common computer errors, protects you against file loss, malware, hardware failures and optimizes your PC for maximum performance. You can fix your PC problems quickly and prevent others from happening with this software:

  • Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
  • Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
  • Step 3 : Click “Repair All” to fix all issues.

download



2) Restart your computer to check if the problem is present.
If this is not the case, use the Windows Memory Diagnostic Tool to check for memory problems.

3) On your keyboard, press the Windows Logo + R key simultaneously to open the Run field.

4) Type “mdsched.exe” and click on OK.

5) Click Restart Now and search for problems.

Disconnect unnecessary devices (if any).

It appears that an overloaded power supply unit may also be responsible for the BSOD 0x0000001e. If you have several devices connected to your computer, it is a good idea to remove those that are not needed to see if the problem persists.

Disconnect all unnecessary connections and use your computer normally to see if the BSOD crash continues. If the accidents stop completely, you have been able to determine that it is an energy problem. In this case, you have two options to mitigate the problem:

  • Switch to a more powerful power supply that can provide enough power to all your connected devices.
  • Buy a USB hub with its own power supply to reduce the load on your power supply.

CONCLUSION

The KMODE_EXCEPTION_NOT_HANDLED error is a annoying Windows BSOD that occurs for various reasons. It usually starts after upgrading Windows 7, but even simple things like trying to take a screenshot can trigger KMODE_EXCEPTION_NOT_HANDLED to stop the error code 0x0000001e.

https://www.dell.com/support/article/in/en/inbsd1/sln167355/blue-screen-error-stop-0x0000001e-kmode_exception_not_handled?lang=en



RECOMMENDED: Click here to troubleshoot Windows errors and optimize system performance