How to Resolve “M.2 Drive Not Showing Up” Problem in Windows 10

Updated April 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link

1. Download and install the repair tool here.
2. Let it scan your computer.
3. The tool will then repair your computer.

In the world of personal computers, people are constantly looking for more and more improvements to make sure that your system can keep up with all the modern programs and games that exist today.

While there are plenty of improvements that could be taken care of, everyone thinks about how much RAM one has. Some people choose external hard drives, but the best option is SSDs, whether they are external or internal.

Sometimes, however, the hard drive just stops showing up. Is this a sign that it is broken? Should you contact Technical Support? Can you easily fix the problem yourself? Below you will find the causes and solutions.

What causes “m.2 drive not showing up” in Windows 10?

• Not initialized or partitioned: the SSD is not initialized or partitioned. As a result, the SSD does not appear as a normal drive in Windows File Explorer.
• Connection issue: The connection between the SSD and the motherboard may be faulty. Always check the connection first if the installed SSD or hard drive does not show up.
• Incompatible drivers: Memory controller drivers may be incompatible, outdated, or corrupt.
• Incorrect BIOS settings: The SATA storage controller mode/protocol is incorrectly configured (AHCI, ATA, RAID, etc.). Also, make sure your computer supports M.2 SSDs and NVMe SSDs.
• Faulty hard drive: Basically, a hard drive is considered physically damaged if it is not recognized in disk management, which also applies to SSDs.

How to fix “M.2 drive not displayed” in Windows 10?

Update the M.2 plunger

1. Go to Device Manager by pressing Windows + X at the same time.
2. Expand the hard drives.
3. Right-click on the M.2 drive and select Update Driver Software.
4. Select Search automatically when the Software Update window appears.
5. Once the process is complete, restart your computer.

Disable Safe Boot

1. Restart your computer and press F2 or Delete to enter BIOS.
2. Click the Security tab.
3. Change the default setting of Secure Boot to Disable.
4. Click the Save and Exit tab.
5. Click Save Changes and select Yes.
6. Click the Security tab again.
7. Select Delete all Secure Boot variables.
8. Select Yes to continue.
9. Select Ok to reboot.

Configuring the M.2 SSD

1. Boot the computer and press F2 or Clear to enter BIOS.
2. To expand the SATA configuration.
3. Select Configure SATA as IDE.
4. Press F8 to save and exit.

Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here

Frequently Asked Questions