Fix Stop Error 0x0000009f Blue Screen of Death

Stop Error 0x0000009f is also known as DRIVER_POWER_STATE_FAILURE. This blue screen of death error indicates that the driver is in an incoherent or invalid state of tension.

Stop Error 0x0000009f

The most common cause of this error is obsolete driver software for your installed hardware. Another cause is an obsolete BIOS or a recent hardware change.

DRIVER_STATE_POWER_FAILURE is a blue screen error that occurs when the voltage state changes, i.e. when you shut down, restart or hibernate your computer, hibernate, and so on. During this process, all hardware installed on your computer is instructed to change its power state to shutdown, but if there is an error in a particular device driver, the device does not respond as Windows wants, and you will be faced with this STOP error. read more

Fixing BSOD Problem with Stop Error 0x0000116

The VIDEO_TDR_ERROR has a stop error code of 0x0000116, which indicates that an attempt to reset the display driver and restore it after a timeout has failed.

Stop Error 0x0000116

The error 0x0000116 can be caused by damage to Windows system files. Corrupted system file entries can pose a real threat to your computer’s well-being.

There can be many events that have led to errors in system files. Incomplete installation, incomplete uninstallation, incorrect removal of applications or hardware. It can also be caused if your computer is recovered from a virus or adware/spyware attack or an inappropriate computer shutdown. All of the above activation may result in deletion or corruption of Windows system file entries. This corrupted system file leads to missing and incorrectly linked information and files needed for the application to run properly. read more

Repair: Blue Screen Error 0x0000000a (Solved)

Many BlueScreens are caused by old or damaged drivers, especially video drivers, but there are other causes. The error message Stop 0x0000000a means that a process or driver has attempted to access a memory area without authorization. It is also known as IRQL_NOT_LESS_OR_EQUAL.

0x0000000a Blue Screen Error

This stop error is output when accessing the reverse (or invalid) memory when the IRQL value is too high. The error that causes this error check usually occurs after a defective device driver, system service, or BIOS has been installed. read more


The VIDEO_MEMORY_MANAGEMENT_INTERNAL also known as Stop Error 0x0000010E indicates that the video memory manager has encountered a condition from which it cannot recover.

Stop Error 0x0000010E

This error is known to occur as a result of a damaged or obsolete device driver. Sometimes device drivers are misconfigured, damaged or obsolete. This can also happen after a Windows upgrade or downgrading of Windows from a newer system to an older system. This BSOD error is usually caused by the incorrect behavior of a video driver. read more


The MANUALLY_INITIATED_POWER_BUTTON_HOLD output has the error code value 0x000001c8.


The error is checked if the power switch is pressed for 7 seconds but released 10 seconds before the UEFI is reset.

The long power button bug control is similar to the 0xE2 MANUALLY_INITIATED_CRASH bug control, which is triggered by a combination of keys.

Since error checking takes place at an undefined time, there is no explicit problem indicated by the error checking parameters.

This blue screen of death error is very rare and has some information to guide users. However, here are some general solutions that can help you solve this BSOD problem. read more


If you receive this error message 0x000000BE, it usually means that one of the Windows 10 device drivers is trying to write data to a read-only sector of your computer’s internal memory.


This problem occurs because a signed value is used as the debug log list index in the Storport.sys driver. If the value exceeds the maximum positive value, a negative index is used to query the debug log entries. This behavior results in invalid memory access. Therefore, the stop code is triggered.

No matter why you have such blue screen stop error code problems, here are several methods to correct such errors 0x000000BE trying to write to read only the memory problems: read more


On this page, we will discuss information about the cause and possible solutions of the blue screen of death related to startup (BSOD) with the error “UNMOUNTABLE_BOOT_VOLUME” and the stop code STOP: 0x000000ED. This error is sometimes written incorrectly as UNMOUNTABLE_BOOT_DRIVE, but it is functionally the same.


If you received a blue screen error or a shutdown code, your computer suddenly shut down to protect against data loss. A hardware device, its driver or associated software may cause this error. read more


If you are monitored by ATTEMPTED_SWITCH_FROM_DPC blue screen of death error, you are not alone. Many Windows 10 users also report this problem. As boring as it may sound, it can be fixed.


The ATTEMPTED_SWITCH_FROM_DPC error has the code 0x000000B8, which indicates that an illegal operation has been attempted by a delayed procedure call (DPC routine).

This error is caused by a Delayed Procedure Call (DPC routine) that attempted to perform an illegal operation. The DPC is triggered when the kernel detects a suspension condition and makes a call to terminate or interrupt software. We have listed a number of known workarounds to resolve this problem. Follow the solutions from top to bottom. read more

Fixing NMI_hardware_failure BSOD with Error Code 0x00000080

NMI_HARDWARE_FAILURE error has code 0x00000080 This blue death error screen indicates that a hardware malfunction has occurred. A large number of hardware malfunctions can cause the NMI_HARDWARE_FAILURE BSOD error. The exact cause is difficult to determine.


NMI stands for Non-Maskable Interrupt, which is a hardware error that leads to a blue screen error after installing new hardware or software.

Here are some applicable solutions to correct this BSOD error NMI_HARDWARE_FAILURE (Error 0x80).

Disconnect newly connected hardware

This error can be caused by newly installed hardware such as a sound card, graphics card and hard disk. Remove or replace it. Then restart your computer to see if it works. read more

Fix Blue Screen Error with rtwlane.sys in Windows (Solved)

The system file rtwlane.sys is the RealTek NIC/Wired – Realtek PCIEWireless LAN PCI-E NIC driver. Problems with this driver cause DRIVER_IRQL_NOT_LESS_OR_EQUAL (error code 0x000000D1), which is a shutdown error that Windows users recently detected after upgrading from Windows 10 or updating to Windows 10 anniversary. The error often comes with a blue screen of death (BSoD), which displays the error message 0x000000D1.


Here are some methods that will help you solve BSODs created by rtwlane.sys: read more