Fixing mrxsmb.sys BSOD Error in Windows


Frustrated by the MRXSMB.Sys error message? Well, you should want to know what this MRXSMB.sys file is, what causes this error and the most important thing is how to fix it. On this page you will find all the answers to your questions about this MRXSMB.sys and the methods to solve it.

MRXSMB.Sys BSOD ERror

Windows generates the MRXSMB.Sys error if the MRXSMB.Sys file cannot be used due to deletion or corruption of the MRXSMB.Sys file. This error is visible under Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10. MRXSMB.sys blue screen errors usually occur when you install new hardware or software. You may experience MRXSMB.sys blue screen errors when you run or close Windows, boot or shut down your computer, or use certain operating system functions. read more

DRIVER_POWER_STATE_FAILURE Error Repaired


The DRIVER_POWER_STATE_FAILURE error has the value 0x0000009F, which means that the driver is in an inconsistent or invalid voltage state. The error is most likely caused by the incompatibility between your PC’s power management and one or more installed drivers. It usually occurs during one of the following power state transitions:

  • Switch to standby mode or return to standby mode.
  • Switch to standby mode or return to standby mode.
  • Turn off or start your computer.

DRIVER_POWER_STATE_FAILURE Error

If you receive a blue screen error with the message DRIVER_POWER_STATE_FAILURE, you can try to correct the problem here. Fortunately, BSOD errors can be corrected. This manual describes various methods for updating or reinstalling drivers or adjusting performance settings. Read the instructions below and follow the steps to correct DRIVER_POWER_STATE_FAILURE in a few simple steps. read more

Fixing BSOD with Stop Error Code 0x00000133


The stop error code 0x00000133 is also known as DPC_WATCHDOG_VIOLATION Bug Check. This error check indicates that the DPC watchdog was executed either because it detected a single long delayed procedure call (DPC) or because the system spent more time on one or more DISPATCH_LEVEL interrupt request level (IRQL). The value of parameter 1 indicates if only one DPC has exceeded a waiting time or if the system has spent a longer cumulative period at IRQL DISPATCH_LEVEL or more. DPCs should last no longer than 100 microseconds and ISRs no longer than 25 microseconds, but the actual timeout values on the system are much higher. read more

BSOD SYSTEM_SERVICE_EXCEPTION (win32kbase.sys) Fixed


If your computer seems to reboot and accidentally shut down, this tutorial should hopefully lead to the resolution of this blue screen.

BSOD win32kbase.sys

SYSTEM_SERVICE_EXCEPTION (win32kbase.sys) is the BSOD (“Blue Screen of Death”) error message that appears when the corresponding win32kbase.sys file is corrupted or deleted. It is an essential element of the recording system because its function is to manage the good collaboration between the hardware and the drivers of your device.

Win32kbase.sys is one of the Windows.sys files designed to interact with the drivers and hardware of your system. Deleting or modifying them can cause serious errors, as this is one of many files important for normal Windows operation. read more

Fix SYSTEM_SERVICE_EXCEPTION ks.sys BSOD Error


KS.sys is a Windows base file that manages video recording and its drivers. It is part of Windows since Windows XP and continues under Windows 10. This gives us a good idea of where to start troubleshooting.

SYSTEM_SERVICE_EXCEPTION ks.sys error

The SYSTEM_SERVICE_EXCEPTION (KS.SYS) error, followed by a blue death screen, indicates that the system has some kind of communication error with the drivers of your video camera. It is more likely to be seen by owners of HP systems with built-in webcams or by owners of HP webcams. It is usually triggered by an update to Skype, and the most frequently found update is an update to Skype 6.14. read more

Repair Bluescreen with Stop Error 0x1000007e


0x1000007e is a critical error that appears when Windows crashes due to a kernel problem to prevent further damage to your computer. Over time, this error becomes more frequent and leads to a total deterioration of the system. Therefore 0x1000007e must be resolved as quickly as possible.

0x1000007e Stop Error

This error, also known as System_Thread_Exception_Not_Handled, is caused by obsolete drivers. This indicates that a system thread created an exception that the error handler did not catch. It is a kind of software and with the help of the drivers, your computer hardware will communicate with Windows. The error is caused by drivers, especially graphics drivers. If your files are damaged, old or incompatible, the error occurs. You will see the file name of your error on your screen. Then you can start troubleshooting. read more

Fix Blue Screen Error NETIO.SYS (Solved)


The Netio.sys crash is often caused by an intrusive network manager added to the Nvidia Bloatware package and is not necessary in addition to the display driver. This error also has something to do with your motherboard network driver and something is causing an error or conflict with the driver that led to the BSOD, this was my first clue and the most important thing you need to know about this error.

NETIO.SYS BSOD Error

Many Windows users have a “NETIO.SYS” error on their Windows computer. Many of them get this error randomly and frequently. There are several ways to see this error on the blue screen: read more

Repair: Stop Error 0x0000004e or PFN_LIST_CORRUPT


Bugcheck Error 0x0000004e Stop Code Windows Blue Screen of Death BSOD indicates that the PFN (Page Frame Number) list is corrupted. This error is also called a Windows fatal error. This error is also caused by hardware or software problems. This error caused your PC to crash and displayed an error on the blue screen. This is some kind of bugcheck 0x0000004e error problem.

Error 0x0000004e PFN_LIST_CORRUPT

The PFN is used by your hard disk to determine the path of each of your files on the physical disk. This error message usually appears if the page number in the short PFN list is damaged by an internal or external error. read more

How to fix 0xC0000005 Windows Application Error (Solved)


The 0xC0000005 error is often caused by poor maintenance of your computer and corrupted registry entries that accumulate when you install and delete programs, especially if you install new programs on old programs that have not been completely removed. To correct error 0xC0000005, you can manually check all registry entries, but this procedure is long and complicated. If you are not a computer expert, it may take a few days to check your registration manually. You can also damage important registry entries. read more

How To Fix BSOD error 0x00000027 rdbss.sys in Windows


The Windows system can crash and generate stop error code 0x00000027 in the Rdbss.sys process. This problem occurs because the Rdbss.sys driver (Redirected Drive Buffering SubSystem driver) incorrectly releases a File Control Block (FCB) object twice. It can occur if it is an illegal operation performed by an application.

Rdbss.sys BSOD

The defective rdbss system can lead to Blue Screen or BSOD. Occasionally, a boot error may occur on a Windows PC due to a defective rdbss system driver.

There can be many reasons for problems with rdbss.sys.
– The RDBSS service does not work.
– Improperly configured network and server and/or hardware problems.
– Viruses and malware.
– Some programs are known to crash the RDBSS service.
– Missing and/or incorrect drivers. read more