How to Troubleshoot “Unexpected Store Exception” on Windows PC

Users report encountering the UNEXPECTED_STORE_EXCEPTION error on the blue screen of death (BSOD) after the Anniversary Update, which is quite annoying. The update is supposed to fix Windows problems, not create new ones. The main reason for the BSOD error “Unexpected Store Exception” seems to be your antivirus program, but there are other reasons, but it seems to be a common problem for many users.

What is the cause of the unexpected memory exclusion?

  • Reimage recovery error
  • No bootable device error.
  • BSOD (Blue Screen of Death)
  • Windows Surface Pro problem
  • Error problem on your Windows PC

How to troubleshoot the “Unexpected Store Exception” error?

sfc-command
Launch the system file checker

  1. Press the Windows + X key.
  2. Click Command Prompt (administrator).
  3. When it opens, type sfc /scannow and press Enter.

This will start the scan. When it is finished, a message will be displayed. It may say, “No integrity violations detected,” which means that everything is fine. read more

Troubleshooting “Windows 10 Freezes Randomly” Issue

If you type “computer randomly freezes” on the Internet, you’ll find similar complaints everywhere. This problem can lead to other horrible problems like a black or blue screen of death, accidental computer freeze, system crash, or even boot disk failure if users don’t find a way to fix it in time. Therefore, we have collected here the most effective methods that will be helpful to other users.

What causes Windows 10 to freeze randomly?

  • Overheating
  • Missing DLL
  • Software error
  • Broken drivers
  • Virus infections
  • Memory conflict
  • Too many running programs

How to fix random freezing in Windows 10?

Perform a memory check

  1. On your keyboard, hold down the Windows logo key and press R at the same time to invoke the run command.
  2. Type mdsched.exe in the Run window and press Enter.
  3. If you want to check for problems immediately, click Restart Now and check for problems (recommended).
  4. If you want to check later, click Check for problems the next time you start your computer.
  5. Windows will then reboot and you will see this page showing the progress of the check and the number of passes in memory.

Start the disk check

  1. Close all open programs and files.
  2. Click Start -> File Explorer -> This Computer.
  3. Find the disk you want to check, right-click it, and select Properties.
  4. Click the Tools tab and then click Check.

Update your drivers

Windows 10 freeze problem may be caused by outdated drivers. So, to solve the problem, you can try to update your drivers. If you don’t have the time, patience, or computer skills to update your drivers manually, you can do it automatically with a third-party driver update program. read more

How to Resolve Error 0xc00000e9 in Windows PC

Windows error 0xc00000e9 is a specific boot error code that you may see when your computer has trouble booting properly. It causes a blue screen to appear when you try to start your operating system and prevents it from booting.

It appears shortly after you start your computer, but before the Windows login screen, as shown below:

An unexpected I/O error has occurred.
Error code: 0xc00000e9

What causes error 0xc00000e9?

  • Damaged I/O ports.
  • Problems with Windows Update.
  • Boot sector virus or other malware.
  • Faulty external hardware or PC components.
  • Improperly configured UEFI, BIOS, or CMOS settings.
  • Damaged system files or problems with the Windows registry.
  • Incorrectly installed components, such as an unattached hard drive that is not in contact with the motherboard.

How to recover the 0xc00000e9 error message?

=&0=&

How to Resolve: CLOCK_WATCHDOG_TIMEOUT BSOD in Windows PC

The CLOCK_WATCHDOG_TIMEOUT error is related to your system’s hardware and specifically indicates a communication problem between your system and your processor.

When you ask your computer to do something, the operating system tells the processor that it is “interrupting” to let it know what is happening. This is a system-level process called a “system interrupt,” and it is a perfectly normal function of Windows. However, if the system lingers too long in the interrupt phase, which is called the interrupt request level (IRQL), a “blue screen” error occurs. read more

Troubleshooting: Faulty Hardware Corrupted Page in Windows PC

The “Faulty Hardware Corrupted Page” error (Windows stop code 0x0000012B) covers a variety of hardware problems but refers to a single bit error. A single-bit error occurs when a single bit (a tiny piece of data) changes incorrectly during a data transfer. While this may seem like a minor problem, it can cause the system hardware to malfunction, causing the page split code to be corrupted by faulty hardware.

The good news is that there are several solutions for fixing the faulty page breaker code. The bad news is that Windows stop code 0x0000012B can indicate a hardware failure on the system. In particular, the stop code is often associated with faulty RAM. read more

How to Resolve irql_not_less_or_equal Error in Windows 10

The irql_not_less_or_equal stop code error is another “blue screen of death” error that abruptly stops your computer. The fact that it triggers an endless restart cycle makes everyone who encounters this problem uncomfortable. Although the error usually occurs at system startup, sometimes it can occur in the middle of an important task. In this case, you will not be able to save your changes, and all progress will be lost.

Although the problem may seem intractable, it can be solved if you know the cause. This article discusses the possible causes of the irql_not_less_or_equal stop code error and nine effective ways to solve the problem. If you have lost unsaved data due to this error, you can recover it with an effective third-party application. read more

How to Resolve: BAD_SYSTEM_CONFIG_INFO (BSOD) in Windows 10 PC

A Windows Blue Screen of Death (BSOD) error can seem like a disaster, especially if you’re working on something important. Unfortunately, BSODs are usually hard to decipher, and error names like “Unexpected Kernel Mode Trap” and “Bad System Configuration Information” don’t provide much information about the cause (or how to fix it).

If your Windows computer is experiencing a BSOD (Bad System Config Info) error, you need to fix the problem. The first step is to understand what might be causing the error. read more

How to Resolve PNP_DETECTED_FATAL_ERROR on Windows 10

Blue screen of death errors can cause many problems in Windows 10, and unfortunately, these types of errors can sometimes be difficult to fix.

Since these issues can be problematic, today we’ll show you how to fix the blue screen of death problem using the PNP_DETECTED_FATAL_ERROR stop code.

PNP_DETECTED_FATAL_ERROR is a blue screen problem that can cause many problems on your PC. This problem can be quite annoying because it causes your computer to suddenly reboot.

What causes the PNP_DETECTED_FATAL_ERROR?

  • Computer viruses or malware can corrupt your Windows system files.
  • Outdated system drivers can also cause blue screen of death errors.
  • Damaged or corrupted Windows system files.
  • Due to hardware or software problems
  • Due to outdated Windows operating system

How to solve the PNP_DETECTED_FATAL_ERROR?

Update drivers

  1. Press the Windows + R key to run the Run application.
  2. Type devmgmt.MSC in the text box and press Enter to open Device Manager.
  3. In Device Manager, navigate to the desired device and expand the menu.
  4. Right-click on the driver and select Update Driver.
  5. Since we are dealing with the PNP_DETECTED_FATAL_ERROR error, it is best to update the drivers for devices such as keyboards, mice, headsets, etc.
  6. In the window that opens, click Automatically check for driver software updates.
  7. Windows will automatically download and install the latest drivers.
  8. Restart your computer.

Reset driver settings

  1. Press Windows + R, type devmgmt.MSC in the text box and press Enter.
  2. In the Device Manager window, find the desired device and expand the menu.
  3. Right-click the desired driver and select Properties.
  4. On the Driver tab, click Reset driver.
  5. Restart your computer after the driver is installed.

Use DISM to search for corrupted system files

  1. Type cmd in the Start menu search bar and right-click Command Prompt -> Run as Administrator in the search results.
  2. In the command line console, type DISM /Online /Cleanup-image /Scanhealth and press Enter.
  3. Wait for the process to complete, then type DISM /Online /Cleanup-image /Restorehealth and press Enter.
  4. Windows will fix any problems with the system image.

Using the SFC to find corrupted system files

  1. Type cmd in the Start menu search box and right-click Command Prompt -> Run as Administrator in the search results.
  2. In the console, type sfc /scannow and press Enter.
  3. Wait for the process to complete and close the command prompt.
  4. Reboot the computer.

Start the system restore

  1. In the Start menu search box, type System Restore.
  2. In the search results, click Create system restore point.
  3. In the next window, click Create. If the option is grayed out, click the hard disk partition under the Protection
  4. Options -> Configure -> Enable System Protection. Click OK.
  5. Enter a name for the restore point and click OK.

=&0=&

How to Troubleshoot: DRIVER_IRQL_NOT_LESS_OR_EQUAL (storahci.sys) in Windows 10 PC

It looks like you have a problem with the .sys file. In fact, this problem is quite serious because .sys files are a very important part of the Windows operating system. These files are responsible for either critical system processes or device drivers. Therefore, if any of the .sys files are corrupted, problems such as BSODs will occur. Therefore, do not ignore the Storahci.sys error.

The Storahci.sys is a file that is installed by default in a system with Windows 7, 8, 8.1 or 10. Therefore, no matter which version of Windows you use, this file is there, which means the BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL may appear on any of them. read more

How to Troubleshoot “Driver Power State Failure” in Windows 10

Driver Power Status Failure is a rare blue screen error that occurs when a driver goes to sleep mode while it is running. BSOD often occurs when the computer comes out of hibernation and Windows cannot wake up the device driver or the driver takes too long to respond.

The error can be fixed by making simple changes to the power settings, but some users may have to dig deeper to fix the problem. Here are some effective ways to fix the Driver Power State Failure error in Windows 10.

What causes the “Driver Power State Failure” message in Windows?

The “Driver Power State Failure” error (blue screen of death) is usually caused by a problem with the power management of a device connected to your PC. If the device goes into hibernation during use, or does not come out of hibernation when you try to use it, Windows considers it a critical error and displays a BSOD message. read more