boot

How to Repair the IO1 Initialization Failed BSOD in Windows 10

by

Here is another “blue screen of death” (BSOD) error known as IO1 Initialization Failed. This error is critical because it appears on the screen when you shut down Windows.

Windows 10 IO1 Initialization Failed error is displayed to prevent further damage to the operating system due to kernel-related issues.

If you also encounter this initialization failure error, you should fix it as soon as possible as frequent occurrences of this error can cause damage to your system.

Although many reasons cause IO1 initialization failed stop code error such as device drivers, corrupted system files, and others. You need to fix this error quickly to take advantage of the solutions. read more

Solution: Windows 10 Won’t Use Full RAM

by

RAM is a non-volatile storage device that is typically used to store working data and machine code. When you shut down your computer, all data on it is lost because it is a temporary storage device. The more RAM your computer has, the more smoothly it can multitask.

However, when using Windows 10, you may run into a problem. In the “System Properties” or “Task Manager” interface, you may notice that Windows is only using a fraction of the total RAM.

What is the reason why Windows 10 doesn’t use all of the RAM?

In some cases, some of the RAM is reserved for the system, sometimes some of the memory is also reserved by the video card if you have an integrated video card. But if you have a dedicated video card, this shouldn’t be a problem. Of course, 2% of the RAM is always free. read more

Troubleshooting: Stop Error Code 0x00000024 BSOD in Windows

by

When you get error 0x00000024, you may see a blue screen (also called “death screen”) with the message “stop 0x00000024” when you boot your computer or shortly thereafter. This doesn’t mean much to the average user, but it can make it difficult to access your data.

And then it becomes a huge problem. You immediately wonder how to fix error 0x00000024. In this article, you will learn everything about 0x00000024 errors, from their causes to ways to fix them.

What causes the Stop Error Code 0x00000024 BSOD?

  • A virus or malware attack.
  • Damaged device drivers.
  • Old or misconfigured drivers.
  • Damaged hard disk or system files.
  • Drivers conflict due to installation of new hardware.
  • Deleted system files after drivers or software installation.
  • Due to NTFS_FILE_SYSTEM STOP error caused by corrupted RAM.
  • Damage to the Windows registry due to software installation or removal.

How to resolve the Stop Error Code 0x00000024 BSOD?

read more

How to Troubleshoot: Fatal Error C0000034 when Applying Windows Update

by

If you have encountered the fatal error C0000034 when applying the update process and do not know how to fix it, you have come to the right place, because this article will help you. We will show you effective solutions to this error.

New Windows updates can improve your operating system. Therefore, when updates appear, you should install them. However, you may encounter some errors that prevent you from installing Windows updates.

Error C0000034 when applying the update is one such error. If you encounter this error, read on and find solutions in this post. read more

Troubleshoot: Blue Screen Recovery Error 0x0000185 on Windows 10

by

Getting an error on your computer can be frustrating. But it’s even more annoying when you encounter a blue screen error. One of the BSOD errors that you may encounter is the blue screen recovery error 0x0000185.

This is a shutdown error, which means that you won’t be able to start your computer normally until you fix this error. While this error is common in Windows 10, it is also a very common problem in Windows 7, 8, and 8.1.

The occurrence of error 0xc0000185 indicates that your operating system cannot access the necessary Windows OS files on your hard drive to boot. This simply means that your computer cannot communicate with your hard drive or that there is a problem with your system files. read more

Troubleshoot error 0x3A98 when generating WlanReport via CMD

by

Error code 0x3A98 occurs when users try to run a full WlanReport from the command line. This scan is usually performed by users experiencing problems connecting to their own wireless network.

If you too are facing the error 0x3A98 on your PC, this article will help you get rid of it with a few solutions that have helped other users.

What causes error 0x3A98 when generating a WlanReport via CMD

Router mismatch: as several concerned users have confirmed, this problem can also be caused by a problem related solely to your router or modem.

Current Network Problem: It turns out that a faulty network component may also be responsible for this error message. read more

Troubleshooting Stuck at the ‘Preparing to Configure’ for Windows 7 or 10

by

If you use Microsoft Windows 7, you are probably familiar with the message “Preparing to Configure Windows. Do not turn off your computer.” This message appears when you turn on your computer. It means that your system is performing the necessary updates, which shouldn’t take more than 20 or 30 minutes.

I recently waited over eight hours with the same message on my screen during one of these routine updates. I wondered if it was due to a particular update, but it didn’t seem to be. I did a hard reboot, which is not a good idea under normal circumstances, but I had no other choice. After restarting the computer, it was stuck in the same setup process. read more

Fix: Blue Screen Error 0x00000109

by

If you are reading this article, you must have encountered error 0x00000109 (blue screen) when a critical structure has been damaged. There are many reasons for this error, such as installing a new program. Don’t worry, as all the sequences related to blue screen error code 0x00000109 are listed here. This will allow you to identify all the common causes and triggers of this error and follow the appropriate instructions and tips to get your system back up and running.

Blue screen error 0x00000109, also known as Critical Structure Damage, is a p.c. system error that causes the computer to shut down completely. When this happens, it means that the system kernel has detected data corruption or critical kernel code. The kernel is an important part of the operating system (OS). The main role of the kernel is to manage the hardware, especially the processor and RAM. The kernel is divided into two components: the monolithic kernel and the micro-kernel. The latter is responsible for regulating the main tasks of the system, while the monolithic kernel focuses on the various drivers. When a component is corrupted, it affects other components such as hardware, processor, RAM, and even drivers. read more

Troubleshooting error `1720-SMART Hard Drive detects imminent failure`

by

Troubleshooting error `1720-SMART Hard Drive detects imminent failure`

Have you encountered the error “1720-Smart Drive Detects Imminent Failure” while booting up your computer? This means that the drive’s built-in status circuits and firmware have determined that the hard drive itself is about to fail. If this happens, you could lose all your files or the hard drive will eventually stop working.

Hard drives are usually designed to last a long time. Not surprisingly, they often outlive the computer in which they are installed and used. However, no matter how perfect these devices may seem, sometimes they can fail, whether due to user abuse or simply poor workmanship. When a hard drive fails, the error message “1720-Smart Drive Detects Imminent Failure” appears when you boot your computer. read more

Troubleshoot: HDR Black Screen After Adjusting the Volume

by

Troubleshoot: HDR Black Screen After Adjusting the Volume

In Windows 10, you can play HDR (High Dynamic Range) content on an HDR10-enabled built-in display or an external monitor (or TV) connected to your computer.

HDR is a technology designed to improve the contrast and color of the content you see on the screen. Unlike standard dynamic range (SDR), the high dynamic range provides brighter, richer colors and a wider range of detail for better image quality in supported videos, games, and applications.

While HDR technology works easily on powerful smart TVs, it doesn’t work as well on desktops and laptops running Windows 10. You have to make sure your device meets the minimum requirements. You’ll have to manually enable HDR on the screen and in the operating system, and you may run into several problems. read more