How to Resolve: Failed to Install Windows 10 Update 1709

Windows 10 version 1709 is a Windows operating system update that was released in 2017 and is also known as the Windows 10 Fall Creators Update. This version is designed for visual creatives, with improvements to the Photos app and a brand new Paint app, among other things.

However, some users have complained about errors during installation and download. We’ve gathered the information for you on how you can fix this error yourself.

What’s the cause of Windows 10 Update 1709 installation failure?

  • Antivirus software typically monitors your computer’s health, including system files, to make sure there are no potential threats on your computer. Perhaps your antivirus software conflicts with Windows Update and is causing this error.
  • As we all know, Windows automatically synchronizes your time with your time zones. If you have the wrong time zone, this can cause strange problems, such as not being able to install the update.
  • There may be inconsistencies or bad sectors in your computer. There may be irregularities or misconfiguration that cause your computer not to update.
  • If you have network encryption enabled when you connect to the Internet, this is likely the cause of this problem, as it can prevent Windows files from being downloaded, causing this error to occur.

How to fix the failure when installing Windows 10 Update 1709?

Install the update using the Windows 10 Update wizard

  1. Go to the Windows 10 download page.
  2. Click the Update Now button.
  3. Open the downloaded file (Windows 10 Update Assistant) and follow the instructions on the screen to install the latest update for your Windows 10 computer.

Run the DISM utility

  1. Click the “Start” button in the lower-left corner of the screen, then type “cmd”.
  2. In the results, right-click on Command Prompt and select Run as administrator.
  3. Type the following command and press the Enter key on your keyboard:
    dism.exe /online /cleanup-image /restorehealth
  4. Wait until the process finishes. Then restart your computer and see if that solves the problem.

Temporarily disable antivirus software

Sometimes your system can’t install new updates because antivirus software interferes with your system. You can temporarily disable the antivirus software and see if the problem persists (see your antivirus software documentation on how to disable it). read more

How to Repair the ‘Could not connect to the System Event Notification Service’ Error Message?

Is your computer starting up too slowly? Can’t log into Windows with a regular user account? And even if you log in with an administrator account, you will find this error message:

Unable to connect to Windows service. Windows failed to connect to the System Event Reporting Service.

We investigated this particular issue using various user reports. Based on the user reports and the methods they used to resolve the issue, several possible causes could be causing this error message.

What is the cause of the “Windows failed to connect to System Event Reporting Service” error?

read more

How to Troubleshoot “Windows has detected an IP address conflict” Error Message

Like any other computer, your computer gets an IP address when it connects to a network or the Internet. An IP address is a unique address and identifier for your computer. The IP address system allows networks (or the Internet in general) to distinguish and recognize computers. Therefore, in theory, no two computers on a given network (or on the Internet in general) can (or should) have the same IP address.

What causes the “Windows has detected an IP address conflict” message?

Each device that connects to the network is assigned a unique number – an IP address – that allows it to be recognized and communicated with. So, theoretically, no two devices can have the same IP address. But in practice, interference is always possible. Two or more devices may have the same IP address because of a faulty router, computer settings, or even problems with the Internet service provider. read more

How to Repair Backup Error 0x8078012D in Windows 10

Did you encounter error 0x8078012D when backing up Windows to an external hard drive? If so, don’t worry because you are not the only one who has encountered this problem. The main reason for this error may be the 0x8007045D I/O device error.

This error code appears along with an error message that looks like this.

“Operation failed due to a device error at the source or destination. If the source or destination volume is on disk, run CHKDSK /R on the source or destination volume, and then repeat the operation. The request cannot be executed due to an I/O device, error 0x8078012D”. read more

How to Solve: Windows 10 Updates Failed – Error 0X80242FFF

Error 0x80242fff usually occurs when Windows users try to install a Windows update. Given the importance of Windows updates, users must be aware of the corresponding errors.

Error 0x80242fff occurs most often when users try to upgrade from Windows 8.1 to Windows 10 or when Windows Update components are damaged. Since the error window doesn’t show much information about its origin, finding and fixing the error can be a bit tricky.

So today, we are going to discuss a few quick ways to fix Windows 10 updates failed error 0x80242fff that you can try if you encounter it while installing Windows Update. read more

Troubleshooting Windows Defender error 0x800700AA – The service couldn’t be started

A corrupted system file may cause Windows Defender to fail to start automatically and display an error message with the following description:

Windows Defender
Service could not be started.
The requested resource is in use.
Error code: 0x800700aa.

A manual launch also has no effect. Read the steps below to fix Windows Defender error 0x800700aa.

What causes Windows Defender error 0x800700AA?

Damaged files in the system: This can happen to system files as well as any installed program. Conflicts arise that prevent us from using applications normally or even opening them, such as Windows Defender error 0x800700aa. read more

How to Solve Windows 10 Update Error 0x800705B3

It’s hard to expect your system to work properly if your drivers aren’t up to par. You used to have to install the drivers provided by the hardware manufacturer, but with Windows 10, system updates take care of that.

And all too often, this is fertile ground for many problems. One common error resulting from inappropriate drivers is known as 0x800705b3. This error occurs when Windows Update fails to install the appropriate software for the hardware counterparts.

So, if you are facing this error and your updates are stuck, you should check the list below where we have listed the most suitable workarounds. read more

Troubleshooting Windows Update Error Code 0x80070437 in Windows 10 PC

If you have encountered Windows Update error 0x80070437 when upgrading to Windows 11/10, this article may be useful for you to fix this error. If this error occurs on your computer, you will see the following message under Update Status:

There was a problem installing the updates, but we will try again later. If you keep seeing this message and want to look online or contact support, it might help: (0x80070437)

What causes the Windows Update error code 0x80070437?

  • Not enough disk space: The Windows drive (default C drive) may not have enough space to install Windows updates, eventually leading to this error.
  • Insufficient Internet connection: Obviously, without an active Internet connection (good bandwidth) you will not be able to download and install Windows updates. Limited Internet access, despite an existing connection, can also lead to this error.
  • Background programs: When you start your computer, various applications such as antivirus software, basic system processes, and other previously installed software automatically run in the background.
  • Accidental shutdown: Windows update errors can occur if you accidentally shut down or reboot your computer.
  • External hardware devices: Unused external hardware devices such as headphones, printers, scanners, USB drives, speakers, etc. may be causing the error.

How to resolve the Windows Update error code 0x80070437?

Launch the Windows Update troubleshooter

  1. Click on the Windows icon and select Settings.
  2. Select the Update and security category.
  3. Select the Troubleshooting submenu.
  4. On the right side, click the Advanced Troubleshooting link.
  5. Expand Windows Update and click Run Troubleshooter.
  6. Follow the instructions on the screen.
  7. If a fix is available, click Apply this fix.
  8. Restart your computer after performing these steps, and then check to see if you were able to update Windows.

Windows 10 has a built-in application called Windows Update Troubleshooter that helps you detect and fix update-related issues. If you are experiencing such a problem with your device, you should use this tool. read more

Troubleshooting: SysMenu.dll Issues on Windows 10 Startup

SysMenu.dll is part of an advertising program that displays pop-up ads and advertisements on sites you visit. These ads are displayed as blocks with various available coupons, underlined keywords, pop-up ads, or banners.

The adware that runs the SysMenu.dll process appears as a program that displays coupons for the sites you visit and low prices when you visit product pages on sites such as Amazon. Although seemingly a useful service, the SysMenu.dll program can be intrusive and show ads whether you like it or not. read more

How to Troubleshoot: MSI.netdevicemanager40 Fatal Error Message

Problems may occur when installing an HP printer. First, you might accidentally use the wrong installation package or the installation package you are using might be corrupted. There are also a number of errors that can interrupt your printer installation and cause it to fail. One such error is “Fatal error MSI.netdevicemanager40”. The “Fatal error MSI.netdevicemanager40” error can cause an HP printer installation to fail, regardless of which HP printer you are trying to install or which version of the Windows operating system is running on your computer. read more