printer cartridge

How to Repair Canon Printer Error C000 on Windows 10

by

A c000 error means that an internal error has occurred on your Canon printer. Because of this internal problem, the device cannot work properly. This internal problem can have various causes, which we will explain one by one in a few minutes in this Canon C000 printer error troubleshooting guide.

What are the causes of the Canon C000 printer error?

  • The ink cartridge is empty.
  • The printer may also be jammed.
  • The reset was not performed correctly.
  • The ink tank has not been adjusted correctly.
  • The packaging material was not removed correctly.

How to clear a Canon C000 printer error?

Reboot the printer

  1. Turn off the printer
  2. Disconnect the power cord.
  3. Open the top cover of the printer.
  4. Remove the orange tape, remove the white polyester.
  5. Make sure that there is no protective equipment.
  6. Close the printer’s top cover.
  7. Connect the cable and open it.
  8. Make a few test prints and see if the error message appears again.

Remove any foreign objects and clean the paper path

Check your Canon printer for paper dust or other foreign matter. It could be a paper clip, a torn piece of paper, or even a large piece of dust that could block the paper feed. These obstructions can cause the Canon printer to display a Canon C000 message, causing the print job to stop suddenly. read more

How to Repair Epson Printer Error 0x10 on Windows 10 Computer

by

Many users report that they get an Epson error code 0x10 when using a new Epson printer. However, this error code also appears on older Epson printers.

Sometimes this error code may appear on the screen due to a damaged printer driver. This problem indicates that the printer scanner is defective. Fortunately, there are several possibilities to solve this problem.

What causes error 0x10 in your Epson printer?

  • Hardware error in the scanner
  • A problem in the logic board
  • Particles or paper jammed in the printer
  • Outdated or incompatible printer drivers.

How to resolve Epson printer error 0x10?


Reset the printer settings

  1. First, disconnect the USB power cord from the printer.
  2. Wait a few minutes before restarting the printer.
  3. Press and hold down the power button on the printer.
  4. Hold down the power button for about 50-60 seconds.
  5. Then reconnect the USB cable to the printer while holding down the power button.

Updating the printer driver manually

  1. Press Windows + S and look for Device Manager.
  2. In Device Manager, find your printer.
  3. Right-click on it and choose Update Driver.

Remove any minor debris

Remove any small dirt around the scanner, such as small pieces of paper, paper clips, etc. At the same time, remove dust from the printer. read more

How to Troubleshoot Epson Printer “Error Code 0xf1” on Windows 10

by

A printer is an indispensable part of every home today. You need it to make a printout for a school project or office presentation. But it is very frustrating to get an error message in an emergency. The Epson printer is one of the most popular printers for private and professional use. The most common problem it encounters is error code 0xf1.

Luckily, we are ready to help you step by step to fix your Epson printer error code 0xf1.

What causes the ‘0xf1 error code’ on Epson printers? read more