Updated November 2022: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
- Download and install the repair tool here.
- Let it scan your computer.
- The tool will then repair your computer.
Red Dead Redemption 2 now launches on PC with online mode in tow, but an unfortunate error 0x20010006 seems to have crept in as well.
Trying to log into Red Dead Online and encountering error 0x20010006 can be pretty scary. Here’s what we know and a possible solution.
Error 0x20010006 only affects Red Dead Online, which means you probably won’t notice it if you try to go to Red Dead Redemption 2.
The full text reads, “You have exited Red Dead Online (error: 0x20010006) due to an error with Rockstar Game Services.”
So it’s safe to assume that error 0x20010006 is not caused by something at the end of the drive. On the contrary, it has to do with the mysterious magic that Rockstar servers use.
While these types of errors provide no solution other than waiting, two things can sometimes work in the case of Red Dead Online error 0x20010006.
For starters, there are several ways to fix error 0x20010006. However, under certain circumstances, players should consider that the problem may be out of their control.
However, if none of the above actions fixes error 0x2001006, the problem may be server related. At this point, all you can do is wait for Rockstar to fix the problem. You should also check if the Rockstar servers are down before performing any of the following actions. Now perform the following steps to fix error 0x2001006.
Restart Red Dead Online.
Whether you agree or disagree, this is one of the most important and easiest things to do if your game crashes, hangs on the loading screen or you encounter code. Remember to reboot or restart the game.It is also recommended to restart your console or computer to fix any malfunction.
- Go to Control Panel> Network and Internet> Network and Sharing Center> Change Adapter Settings.
- Right click on “Network Connection”> select “Properties”.
- Now select Internet Protocol version 4 (TCIP / IPv4) from the list> click “Properties”.
- Select Use the following DNS server addresses> Enter your preferred and alternate DNS server addresses> Click OK.
- You can also configure a user-defined DNS server for IPv6 connections with Internet Protocol version 6 (TCIP / IPv6).> Click Properties> Enter IPv6 addresses> Click OK.
Simply log in on the side of your connected router using a web browser.
Go to WAN> enter your preferred DNS server addresses> save the changes.
After that, reboot your router and see if Red Dead Online is running.
Turn on UPnP in your router settings
You can also expect this problem if your router cannot automatically redirect the ports used by Red Dead Online. In most cases, this problem occurs with older routers or routers that have Universal Plug and Play (UPnP) turned off.
If you suspect that UPnP is disabled in your router’s settings, you should use the following procedure to enable this option and make sure that any port actively used by Red Dead Online on PC, Xbox One or Ps4 is redirected correctly. CONTACT.
Whitelisting the Solo Lobby tool
If you are interested in modding and are using the Solo Lobby program on your PC, the cause of the random 0x20010006 outages may be due to a series of Windows firewall inbound and outbound rules that are preventing data exchange between your local installation and Rockstar. Block the server.
Several affected users struggling with the same issue have confirmed that they have fixed the problem by going into their Windows Firewall settings and removing the inbound and outbound rules associated with Solo Lobby.
With the fixes described in this guide, you should be able to resolve error 0x2001006.
Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here
CCNA, Web Developer, PC Troubleshooter
I am a computer enthusiast and a practicing IT Professional. I have years of experience behind me in computer programming, hardware troubleshooting and repair. I specialise in Web Development and Database Design. I also have a CCNA certification for Network Design and Troubleshooting.