Last Updated on December 8, 2020
Updated December 2022: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
- Download and install the repair tool here.
- Let it scan your computer.
- The tool will then repair your computer.
Error Code 43 is one of several error codes of Device Manager. It is generated when Device Manager stops a hardware device because the hardware has reported an unspecified problem to Windows.
This general message may mean that there is a real hardware problem or just a driver error that Windows can’t identify as such, but as far as hardware is concerned.
It almost always looks like this:
Windows stopped this device because it reported a problem. (Code 43)
Detailed information about Device Manager error codes, such as Code 43, is available when viewing the device status in its properties.
The Code 43 error can be applied to any hardware device in Device Manager, although most Code 43 errors occur on video cards and USB devices such as printers, webcams, iPhones, etc. E. related devices.
Reboot your PC
Rebooting your Windows PC may solve the problem, because the device drivers can be booted the next time you boot up and the device can operate in the same mode as before.
It is worth a try, but only once. If you find that Windows Code 43 starts up again in the next session, rest assured that this is not a temporary hardware problem but requires more attention.
Reinstall the driver
To solve this problem, you can manually reinstall the driver. Follow these steps:
- In Device Manager, right-click the problem device and select “Delete”. This is used to uninstall the driver.
- You may see a dialog asking you to confirm the installation. Click OK, and the Device Manager will uninstall the device.
- After uninstalling the driver, click Scan for hardware changes in the menu at the top of the Device Manager window. Then the Device Manager will scan your system and automatically reinstall the device.
- Reboot your computer and see if the error code 43 has disappeared.
Make sure that the video card is inserted correctly.
Before diagnosing the problem with software workarounds, the first thing to do is to make sure that the video card is properly installed in the slot. Press down tightly and make sure that all pins are securely in place. If you have a laptop, turn the power on and off again as described below.
- Press Windows + R, type “devmgmt.msc” in the dialog box and press Enter.
- In Device Manager, expand the “Graphic Maps” category, right-click the device and select “Disable”.
- Now turn off your computer. Take out the battery (for your notebook) or the power cord (for your PC).
- After performing the above steps, restart the computer, turn the equipment on the same way as we turned it off and see if it works correctly.
Remove the Lucid VIRTU MVP software
Since the last update of Windows, NVIDIA has officially announced that Lucid VIRTU MVP software is incompatible with NVIDIA devices and causes discrepancies that lead to various problems, including those that have arisen. This software mainly allows switching between embedded graphics and a discrete graphics card. This is a very useful tool, but it does not seem to work with NVIDIA software.
Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here
CCNA, Web Developer, PC Troubleshooter
I am a computer enthusiast and a practicing IT Professional. I have years of experience behind me in computer programming, hardware troubleshooting and repair. I specialise in Web Development and Database Design. I also have a CCNA certification for Network Design and Troubleshooting.