How to Repair Error Printing Message in Windows 10 Printer

Upgrading to the new Windows 10 operating system can cause problems and errors on your computer. Errors and problems such as incompatibilities, errors during the upgrade and upgrade process, and others. There are also cases when the video card, network devices, and other drives don’t work properly.

Although Windows 10 is a reliable operating system, sometimes errors occur, such as the “Print Error” message when you try to print something. In this final part of our troubleshooting series, we’ll show you how to fix the “Print Error” message on your Windows 10 computer. read more

How to Repair Error E05 on Canon Printer in Windows 10

Printers are designed to provide the best quality, and when it comes to printing, this error can be quite frustrating. The E05 error is a fairly common problem with Canon printers. But before you can figure out how to fix this error, you need to understand what the error is, and only after that can you find out how to fix this error code.

Canon printer error E05 is a common error that can occur in Canon printers. The E05 error occurs in the printer when there are problems with the ink cartridges. In this blog, Canon printer error E05, we will discuss the E05 error in detail. read more

How to Repair Canon Printer Error C000 on Windows 10

A c000 error means that an internal error has occurred on your Canon printer. Because of this internal problem, the device cannot work properly. This internal problem can have various causes, which we will explain one by one in a few minutes in this Canon C000 printer error troubleshooting guide.

What are the causes of the Canon C000 printer error?

  • The ink cartridge is empty.
  • The printer may also be jammed.
  • The reset was not performed correctly.
  • The ink tank has not been adjusted correctly.
  • The packaging material was not removed correctly.

How to clear a Canon C000 printer error?

Reboot the printer

  1. Turn off the printer
  2. Disconnect the power cord.
  3. Open the top cover of the printer.
  4. Remove the orange tape, remove the white polyester.
  5. Make sure that there is no protective equipment.
  6. Close the printer’s top cover.
  7. Connect the cable and open it.
  8. Make a few test prints and see if the error message appears again.

Remove any foreign objects and clean the paper path

Check your Canon printer for paper dust or other foreign matter. It could be a paper clip, a torn piece of paper, or even a large piece of dust that could block the paper feed. These obstructions can cause the Canon printer to display a Canon C000 message, causing the print job to stop suddenly. read more

How to Repair Printer Printing Blank Pages on Windows 10

Today, a printer or two can be found in almost every school, home and office. From printing souvenir photos to everyday documents and reports, it has become an indispensable tool in today’s world. However, this handy printer has a few weaknesses that can sometimes confuse the user.

One of the most frustrating things about working with the printer is when it suddenly prints blank pages. And if you are working on an important document or file, this problem can be quite annoying.

Fortunately, there are ways to solve this problem so that you can pick up right where you left off. In addition, they are so simple that you can do them yourself with little to no technical knowledge. read more

How to Repair Epson Printer Error 0x10 on Windows 10 Computer

Many users report that they get an Epson error code 0x10 when using a new Epson printer. However, this error code also appears on older Epson printers.

Sometimes this error code may appear on the screen due to a damaged printer driver. This problem indicates that the printer scanner is defective. Fortunately, there are several possibilities to solve this problem.

What causes error 0x10 in your Epson printer?

  • Hardware error in the scanner
  • A problem in the logic board
  • Particles or paper jammed in the printer
  • Outdated or incompatible printer drivers.

How to resolve Epson printer error 0x10?


Reset the printer settings

  1. First, disconnect the USB power cord from the printer.
  2. Wait a few minutes before restarting the printer.
  3. Press and hold down the power button on the printer.
  4. Hold down the power button for about 50-60 seconds.
  5. Then reconnect the USB cable to the printer while holding down the power button.

Updating the printer driver manually

  1. Press Windows + S and look for Device Manager.
  2. In Device Manager, find your printer.
  3. Right-click on it and choose Update Driver.

Remove any minor debris

Remove any small dirt around the scanner, such as small pieces of paper, paper clips, etc. At the same time, remove dust from the printer. read more

How to Troubleshoot Dell Printer Not Printing Black on Windows 10

Dell printer is the most common printer and computer enthusiasts love Dell printer for its exciting features. The Dell printer is equipped with black and white printing technology and works with laser technology.

Suppose your Dell printer cannot print a page, so in this article, we will explain how to get your Dell printer not to print in black color a problem that is very common with Dell printers to solve.

Why the Dell printer does not print black?

  • Printer driver problem
  • Inadequate source data
  • Problem printing on paper
  • Problem with the print head
  • Problems with the ink cartridge

How to fix a Dell printer that is not printing black?

=&0=&

How to Troubleshoot “Printer Offline” Issue on Windows 10

Printers, of course, are not a new technology, so you would think that they would now work without problems. Unfortunately, this is not the case. One problem you may encounter is the message that your printer is offline in Windows 10.

Any good modern printer can connect to your computer via Ethernet or Wi-Fi. But what do you do if you get the dreaded “Printer not online” status error? How do you get the printer back up and running?

What is the cause of the ‘Printer Offline’ error?

There is no specific cause for this error, but the problem may be caused by outdated or incompatible drivers, a print spooler service conflict, a physical or hardware connection problem between the printer and your PC, etc. read more

How to Repair Error Code OXC4EB827F on HP Printers

This oxc4eb827f error code appears on your HP printer when it gets stuck due to a power supply error, and can be easily fixed. I have mentioned 2 simple methods that you can use to fix this problem.

Printers are one of the most important devices used in everyday life to make hard copies of important documents, etc. And HP is the kind of brand that makes many printers, and among all those choices, the HP Envy Printer 4500 is one of the coolest models.

What causes printer error OXC4EB827F?

This error can be caused by

regular use of the printer read more

How to Repair Error 5011 on Canon Printers

This type of Canon 5011 error is usually caused by a problem with the cartridge holder jamming inside. This printer problem prevents users from scanning. To solve this problem, there are several troubleshooting steps to take.

However, applying these solutions is quite difficult. The problem can also occur due to a manufacturing error. Here are some solutions that you can apply to fix the Canon printer error with error code 5011.

What causes Canon printer error 5011?

Canon printer error 5011 can occur in your Canon printer because of the paper of all the objects that are left in the printer. Therefore, if this error occurs in your printer, you should check the inside of the printer to see if there is anything left inside the printer. read more

Having Err 99 in Canon? Perform the following steps

Having Err 99 in Canon? Perform the following steps

It’s quite common for Canon DSLR cameras to get an “Error 99” message. Some say it’s a memory card error, others say it’s related to the camera battery. The truth is that it could be one of two or several other problems that could be related to either the camera body or the lens.

Here are some tips to help you diagnose error 99. These tips assume that you have already tried a different lens (from the camera manufacturer) and a different CF card (freshly formatted). read more