Updated December 2023: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
- Download and install the repair tool here.
- Let it scan your computer.
- The tool will then repair your computer.
No WiFi after upgrade to Windows 10? Is WiFi offline? If your Wi-Fi does not work after upgrading to Windows 10, this message shows you how to fix the problem.
No WiFi after upgrading to Windows 10
December 2023 Update:
You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:
- Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
- Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
- Step 3 : Click “Repair All” to fix all issues.
After upgrading from Windows 8.1 to Windows 10 Pro or Windows 10 Enterprise, you may notice that no wireless network is available. If you are using a built-in Ethernet adapter or a USB-Ethernet adapter, wired Ethernet connections may also not work properly. This can be done by the presence of unsupported VPN software.
Here are some things you might try:
1] Restart your computer. Reset your Wi-Fi router and check if it works.
2] Next, verify that the VPN software is installed on your computer. If it does not support Windows 10, uninstall it and see if it solves the problem. If so, visit the software manufacturer’s website and download the version that supports Windows 10.
3] Turn off your firewall and check if this is the cause.
4] Open Settings > Network and Internet > Airplane mode. Make sure the aircraft mode is disabled.
5] To solve this problem, KB3084164 recommends the following. First run in a PDC, (2)
Run the following commands one at a time at an increased command prompt :
988248f3reg Delete HKCRCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
988248f3 -v -v -u dni_dne
If this does not work for you, open the registry editor. Navigate to the following registry key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}.
988248f3
If present, delete it. It basically does the same as the command reg delete‘.
6] The network reset function in Windows 10 helps you reinstall network adapters and reset network components to their original settings.
7] If you do not see your Wi-Fi network name at home, first make sure your router is configured to send the network name.
To verify this, connect your PC to your router using an Ethernet cable. Then open your browser, enter the IP address of your wireless router in the address bar and press Enter. Log in and visit the wireless settings page. Make sure the Enable SSID Broadcast, Wireless SSID Broadcast, etc. option is enabled.
The problem could also affect surface equipment.
Let us know if anything has helped you. See also if Demóstenes’ comment below helps you.
Related information: Limited WiFi connection problem on Windows 10.
Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here
