Fix: Safe Mode Won’t Accept Password Problem

Updated April 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link

1. Download and install the repair tool here.
2. Let it scan your computer.
3. The tool will then repair your computer.

You are trying to connect to the safe mode of Windows 10, but you cannot connect. Since the Windows 10 Safe Mode password does not always accept your password, which we call PIN in Windows 10, the reason is simple, let me tell you. If you connect to your PC under Windows 10, use a PIN code. You are all trying to enter Safe Mode on Windows 10 with your default Windows 10 PIN.

Now let’s talk about the tricky part of Windows 10 Safe Mode Password that you need to enter your Microsoft account that you used when you installed Windows 10, the confusion you all face when you try to access Safe Mode Windows 10. The PIN password has been introduced in Windows 8.1 to make it easier for users to remember the password and connect with a PIN as quickly as possible.

Booting in safe mode with network connection

If you’re in a security loop, you’re screwed one way or another. But once you have started in Windows safe mode, you can restart in safe mode with Network.

Once you are on your PC, in safe mode or other, open the console (CMD) and follow it:

The Safemode switch is then activated:

bcdedit /set {current} minimum safeboot

With networking:

bcdedit /set {current} Safeboot network

Then restart the machine with

Stop /r

To return to normal mode, press the back button:

bcdedit /deletevalue {current} safeboot

Use a Windows 10 bootable drive to delete the password.

This workaround proved to be the final solution to the problem in question. However, to do this, you must purchase the bootable installation media created using the media creation tool. Once you have installed Windows 10 on a USB stick, the procedure is simple.

You will need to access the command prompt and a number of commands will allow you to start in secure mode with the password without any problem.

Follow these instructions to create the bootable drive and exceed the password prompt:

1. Download the media creation tool.
2. Connect the USB stick to the fastest port. It must have at least 6 GB of free disk space. Note that this procedure removes everything from the USB stick, so backup your data on time.
3. Select the option “Create installation media (USB stick, DVD or ISO file) for another PC” and click on Next.
4. Select Language and Architecture. Click on Next.
5. Select the “USB stick” option.
6. Wait until the tool has downloaded the file and mounted it on the USB stick.
7. Start with the bootable installation drive and select Repair in the left corner.
8. Select Troubleshooting.
9. Click on Advanced Options, then on Command Prompt.
10. On the command line, type the following command and press Enter :

bcdedit /deletevalue {current} safeboot

Exit the command prompt and restart your PC.

Let’s review the whole process in a few lines. You had a problem connecting in safe mode under Windows 10, but you could not switch to safe mode under Windows 10 because of a password error. So we came to a Windows 10 Safe Mode password solution, we must enter the password of Windows 10 Microsoft account, not the PIN with which we connected to Windows 10. If you have forgotten your password, we discussed a solution to reset the Microsoft account password. We fixed the password error in Windows 10 Safe Mode.

https://www.reddit.com/r/techsupport/comments/3hm4zl/win10_wont_accept_password_stuck_booting_into/

Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here