Fixing 1000007e BSOD or BCCode Error

Updated April 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link

1. Download and install the repair tool here.
2. Let it scan your computer.
3. The tool will then repair your computer.

Some Windows users asked us questions after their computer was recovered after an unexpected crash of the Blue Screen of Death (BSOD). Most affected users report that the problem appears to be random, with no apparent trigger. This particular type of collision can be identified by its unique BCC code (1000007e). The problem is not specific to a particular version of Windows, as confirmed on Windows 7 and Windows 8.1.

The problem is a memory corruption caused by a driver that interrupts the driver loaded in the memory next to it and Windows loads the drivers in a different order at each boot to make virus attacks more difficult to launch. As a result, different drivers are corrupted at each boot and it is difficult to determine the real cause.

The Windows BSOD error 1000007e is usually due to damage to the Microsoft Windows system. An accident can be caused for several reasons. Here are some of them:

1. an obsolete or misbehaving device driver.
2. computer viruses.
3. a corrupt program.
4. a problem with your computer’s memory.
5. the hard disk or motherboard is damaged.

Use Memtest

1. Download a copy of Memtest86 and burn ISO to a CD with Iso Recorder or another ISO burning program. “http://www.memtest.org/#downiso
2. Boot from the CD and run it at least 5 or 6 times.
3. Remember, every time Memtest reports an error, it can be either a bad RAM or a bad motherboard slot.
4. Test the sticks one by one, and if you find a good one, test it in all locations.
5. All errors indicate a memory problem.

If a good known stick in a motherboard slot fails, it is probably the slot.

Using System Restore

System recovery or the last known good configuration may be applicable if Windows does not crash when opening. If you do not remember any significant difficult situations or blue death screens in the past or at the time of previous use of the system, these functions can destroy Windows in this electronic environment. In fact, the principles of system and LKGC recovery rarely cause error code 1000007e. The activation of buggy or suspicious programs may be another cause of error code 1000007e. If error code 1000007e was generated after the installation of the additional utility, disable it or update it in safe mode. The example where the operating system dies with error code 1000007e at boot time is the most ingenious.

Installation of each pending update

It appears that this particular problem can occur in cases where a number of migrated drivers are not compatible with current versions of Windows. This usually happens after users upgrade from an older version of Windows to Windows 10. In this case, the BSOD crash occurs when the incompatible driver is used.

Several concerned users who encountered the same error message reported that they finally managed to solve the problem after installing each pending update that prepared Windows Update for installation. This procedure is successful because it is very likely that incompatible pilots will be replaced by compatible equivalents.

https://www.dell.com/community/Laptops-General-Read-Only/Blue-screen-and-shutting-down/td-p/4027562

Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here