Windows Bulletin

The error check SYSTEM_SERVICE_EXCEPTION has the value 0x0000003b. This indicates that an exception occurred when executing a routine that changes from non-preferred to preferred code.

This error has been associated with excessive use of the paged pool and can occur because the graphics drivers cross the kernel code in user mode and transmit faulty data to the kernel.

This is one of those blue screens of deadly defects that can occur when using Windows. Blue Screen Stop 0x0000003b system_service_exception is a system error caused by corrupted or misconfigured Microsoft IEEE 1394 device drivers and system files. Misconfigured system files on the computer lead to the blue screen Stop 0x0000003b. But even this error can be the result of a series of user actions, such as installing obsolete software or damaging driver files. read more

Disable overclocking in bios. Press the Windows I+ key to open the Settings app. Check for hardware problems. Run Windows Memory Diagnostics. Update your drivers. Uninstall problematic Windows updates. Disable the Turbo Boost feature in the BIOS. Disable additional audio devices.

Get the latest updates with Windows Update. Select Start > Settings > Windows Update, then select Check for Updates.
Try restoring Windows to an earlier time.

Permission. The WHEA_UNCORRECTABLE_ERROR error stands for Windows Hardware Error Architecture. If you are getting a blue screen error (also known as a stop code) with WHEA_UNCORRECTABLE_ERROR, your computer has encountered a hardware problem.

If you see WHEA_UNCORRECTABLE_ERROR, this indicates a hardware error. You will likely need to reinstall or reinstall Windows 10. In some cases, reinstalling the system will result in data loss. Therefore, it is recommended to recover data from a computer even if it does not start. read more

Memory Management Stop Error 0x0000001a is always a memory error. There are many reasons, but they can be heat, overloaded power supplies, a real memory failure, an obsolete motherboard BIOS, bad IDE cables, bad IDE drive bridges and of course “parasites”.

The 0x0000001a is a heavy memory management blue screen of death error code. This is a Windows error, also known as a stop code. The system is automatically forced to restart, which means that any unsaved work is likely to be lost. read more

The best way to fix Wdf01000. sys BSOD is caused by updating device drivers on your computer. Because Windows 10 comes with a lot of drivers, using a dedicated driver update tool like DriverPack or Booster is the quickest way to update everything quickly.

Solution 1 – Update your system
Solution 2 – Check for device driver errors
Fix Reinstall 3: Problematic software.
Solution 4 – Check for viruses and malware
Solution 5 – Run a disk check
Solution 6 – Run an SFC scan
Solution 7 – Run the Blue Screen Troubleshooter
Solution 8 – Register Wdf01000 again system file.

Open the Cortana app.
Type command prompt in the search box, right-click command prompt, and select Run as administrator.
Type the following command at the command prompt, and then press the key: return regsvr32 C:Windowssystem32driverswdf01000.sys. read more

Update Windows 10. Type settings in the search bar. update drivers. Type Windows Device Manager in the search bar. Run the BSOD troubleshooter. Run an SFC scan. Launch DISM. Check your hard drive. Disable Microsoft OneDrive. Remove the problematic software.

The PFN list is corrupted – this is one of the messages that appears when the system shows a BSOD. The most common causes are a faulty driver, a hard drive problem, and system corruption. 1. Update Windows and 10 of your drivers. 2. Run the BSOD Troubleshooter.

Stop code PFN LIST CORRUPT can be corrected. So PFN LIST CORRUPT is a blue screen error that prevents you from using your Windows 10 PC. It is usually caused by a software or hardware issue that you can resolve without contacting Microsoft technical support. read more

How to fix BAD_POOL_HEADER blue screen error on Windows? Fix it now! Solution 1 – Boot in Safe Mode Solution 2 – Apply the latest Windows updates Solution 3 – Disable fast startup Solution 4 – Run the Windows Memory Diagnostic Tool Solution 5 – Update the relevant drivers Solution 7 – Run SFC and DISM Solution 8 – Perform a system restore

The bad header pool error is related to your computer’s memory pool. When you get this common error, it means that your computer is unable to allocate enough memory for the application to run properly, usually due to memory pool corruption.

Remove incompatible software.
Run a memory test.
Check for hard drive errors.
Remove unnecessary devices.
Replace defective or incompatible expansion cards.
After setupdiag, run the failed windows update.
Perform a clean install.

The Bad Pool header or you can say BAD_POOL_HEADER, both are the same BSOD errors that are also known for the error code “0x00000019”. read more

Restart your computer. Press the F8 key or the F11 key. When prompted, select a layout and keyboard. Click Troubleshoot. Click on more options. Click System Restore. Select an operating system. The system will now be restored. Click “Next.

Similarly, this stop code 0xc000021a is also an error in the Windows 10 operating system. This is a blue screen error that occurs when your system freezes after updating or reinstalling the operating system. This Windows 10 stop code 0xc000021a says “Your PC has encountered a problem and needs to restart.

STATUS_IMAGE_CHECKSUM_MISMATCH check failed with value 0xC0000221. This indicates that the system driver or DLL has been corrupted. This theme is for programmers. If you are a customer who received a blue screen error code while using a computer, see Troubleshoot blue screen errors. read more

The error check THREAD_STUCK_IN_DEVICE_DRIVER has a value of 0x000000EA. This indicates that a wire in a device driver runs infinitely.

Dxgkrnl.sys is the Microsoft DirectX graphics kernel file. It works with your graphics card drivers and should not be modified under any circumstances.

This means that the device driver is looped and waiting for the hardware to react. This may indicate a bad card or defective drivers.

If you have recently received errors with dxgkrnl.sys, we recommend that you uninstall or reinstall all programs that caused this error. If this does not solve the problem, or if you have not recently installed a program, try restoring Windows to a previous copy. read more

The WDF_Violation blue screen error can be caused by missing, corrupted, or corrupted system files on your computer. To find out if this is the case, you should run Windows Recovery. There are two ways to fix potential problems with your system files: Repair and replace corrupted system files with Reimage.

Restart your computer and immediately press the F11 key several times until the “Select an option” screen appears.
Click Troubleshoot.
Click on more options.
Click Command Prompt.
At the command prompt, type C: and press Enter.

Note that your Windows blue screen code stops.
Try a specific fix for your blue screen error code.
Check the latest computer changes.
Check for Windows drivers and updates.
Perform a system restore.
Scan for malware.
Test your computer hardware.
Run an SFC scan. read more

This error means that something is wrong with your PC’s registry and you need to revert to the previous configuration. Turn off the computer by long pressing the power button, and then turn it back on. When you see your manufacturer’s logo, turn off your computer again. Repeat the process until Please wait is displayed.

. Bad System Config is a common Bug Check error on Windows systems, mostly caused by malfunctioning system and registry files or Boot Configuration Data (BCD) file. Some load commands in BCD files, or even some older ones, may conflict with newer, more stable files.

Many people could successfully upgrade to Windows 10, but there were also people who had problems with Windows updates. Here we look at the Bad_System_Config_Info error and how to fix it.

The Bad_System_Config_Info error appears on a blue screen in Windows 10 after upgrading from Windows 7. read more